Methoxy Ethyl Cyanoacrylate Adhesive (Low-Odor, Low-Blooming) low odor low blooming ca
methoxy-ethyl monomer-based cyanoacrylate adhesive (MECA) produced by MXBON, due to the larger and heavier methoxy-ethyl monomer (MECA) compared to the ethyl monomer (ECA), is less likely to disperse uncured monomers. This implies that the MECA has significantly improved, if not eliminated, its irritating odor and blooming.
ECA, being smaller and lighter, is more likely to disperse, causing a pungent odor and significant blooming.
MECA, being larger and heavier, is less likely to disperse, reducing the irritating odor and significant blooming.
Usage
- The MECA produced by MXBON with advanced process technology is superior to other brands‘ low-blooming adhesive products. In addition to ultra-low odor and ultra-low blooming, it does not affect the curing time, bonding strength, or physical properties of MXBON methoxy-ethyl adhesive.
- MXBON has further expanded and optimized methoxy cyanoacrylate adhesive technology, developing even more superior and competitive methoxy-ethyl adhesives, such as the market’s first black, toughened, ultra-low odor, ultra-low blooming adhesive, MXBON 22480. Because methoxy-ethyl adhesive is safer and more environmentally friendly, there are no GHS hazard symbols on the label of MXBON methoxy-ethyl adhesive.
MXBON Low-Odor & Low-Blooming Cyanoacrylate Adhesive
Characteristics
-
22401
Low viscosity, resistant to 100°C high temperature, surface insensitive
Transparent and colorless, rapid curing, low odor, low blooming.
Suitable for adhesion of most materials.
Especially for bonding to insensitive surfaces and low energy surfaces.
-
22403
Medium to low viscosity, resistant to 100°C high temperature, surface insensitive
Transparent and colorless, rapid curing, high strength, low odor, low blooming.
Suitable for the adhesion between metal, plastic, and rubber.
Especially for bonding to insensitive surfaces and low energy surfaces.
-
22411
High viscosity, resistant to 100°C high temperature, excellent gap filling ability, impact resistant
Excellent impact strength, peel strength, and high shear strength.
Especially suitable for adhesion between metal, rubber, and plastic.
-
22435
Low viscosity, resistant to 100°C high temperature, impact resistant, surface insensitive
Transparent and colorless, fast curing.
High flexibility, strong bonding strength, humidity resistance, and impact resistance.
Especially for bonding to insensitive surfaces and low energy surfaces.
-
22455
Gel-like, resistant to 100°C high temperature, excellent gap filling ability, surface insensitive
Transparent and colorless, rapid curing, high strength.
Suitable for vertical applications and filling large gaps.
Capable of gap-filling and bonding up to 0.25mm.
Especially for bonding to insensitive surfaces and low energy surfaces.
-
22460
Low viscosity, resistant to 100°C high temperature, penetration type
Transparent and colorless, rapid curing, high strength.
Suitable for post-assembly application of adhesive for capillary infiltration adhesion.
Suitable for porous, absorbent, and low surface energy materials.
-
22480
Black, Low viscosity, high strength, impact resistance
Strong bonding strength, humidity resistance, and impact resistance.
Excellent impact resistance, anti-peeling strength, and high shear strength.
Especially for the adhesion between metal, plastic, and rubber.
-
224902
Low viscosity, resistant to 100°C high temperature, ultra-flexible
Transparent and colorless, rapid curing, Shore D 55.
High bonding strength, high sealant properties.
Suitable for bonding high-flexibility medical devices.
Technical Information
| Item No. | Appearance |
Viscosity mPa.s |
Shear Strength N/m㎡ (Psi) |
Temperature Range (℃) |
Tg (℃) |
(Shore D) | Fixture time (sec) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| MS | AL | ABS | PC | NBR | |||||||
| 22401 | Transparent | 80-120 | 24 (3,532) |
-54℃-100℃ | 150℃ | D 82 | <5 | <5 | <5 | <10 | <15 |
| 22403 | Transparent | 900-1,500 | 25 (3,604) |
-54℃-100℃ | 150℃ | D 83 | <10 | <20 | <5 | <15 | <20 |
| 22411 | Transparent | 3,500-8,500 | 21 (3,079) |
-54℃-100℃ | 150℃ | D 85 | <10 | <20 | <10 | <15 | <20 |
| 22435 | Transparent | 250-500 | 25 (3,635) |
-54℃-100℃ | 150℃ | D 75 | <5 | <5 | <5 | <15 | <15 |
| 22455 | Clear to slightly cloudy gel | 10,000-30,000 | 22 (3,153) |
-54℃-100℃ | 130℃ | D 79 | <75 | <30 | <40 | <50 | <30 |
| 22460 | Transparent | 25-55 | 22 (3,222) |
-54℃-100℃ | 120℃ | D 78 | <20 | <20 | <5 | <20 | <15 |
| 22480 | Black | 100-200 | 25 (3,602) |
-54℃-82℃ | 150℃ | D 80 | <10 | <20 | <5 | <15 | <20 |
| 224902 | Transparent | 30-70 | 24 (3,523) |
-54℃-100℃ | 150℃ | D 55 | <5 | <5 | <5 | <15 | <15 |
Contact Us contact us